DataWedge Setup

  • Click on "Data Wedge Stopped"
  • On the Data Wedge page, click on the Datawedge to toggle it on.
  • Click on "Basic Configuration", select "Keystroke Output" and under "InterChar Delay" enter "10".
  • To Save this setting, do NOT press Back. Press "0" to select the menu to Exit, and then Exit the previous page as well. You will see a popup showing the setting is being saved.



Basic Fusion Settings Before Wifi Setup

  • Scroll to the "Wifi Settings - Log On/Off" and click on the Fusion button.
  • Click on "Options" and on the drop down on the next screen, select "Regulatory" and disable "Enable 802.11d [Infrastructure Mode only]"
  • Select Save.


Fusion Settings - Set Up Wifi In Fusion

  • Scroll to the "Wifi Settings - Log On/Off" and click on the Fusion button.
  • Click on "Manage Profiles"
  • Long press on the default "101" profile and select "Edit".
  • Enter the name and SSID of the client Wifi network
  • Select the correct type of Wifi security for the clients network.
  • Enter any necessary passphrase or password for the client wifi network
  • Under the "Battery Usage Mode" for the Wifi, select "CAM".


Setting up the Battery Settings

  • Press the "Start" menu icon in the bottom left.
  • Select "Settings"
  • Select the "System" menu icon.
  • Scroll to "Power" (battery icon)
  • Select in upper right "Advanced" page.
  • Uncheck the "Turn off device if not used for 1 minute" to keep the device turned on.

 

Setting Up the RDP (Remote Desktop) Session - Scanco Cloud

 

  • Press the "Start" menu icon in the bottom left.
  • Scroll to the bottom of the Programs and long hold onto the "Remote Desktop" icon.
  • While still holding the icon, move the Remote Desktop item up on the screen until the screen reaches the top of the page.
  • Enter the "Remote Desktop" settings.
  • Under "host" always enter "wms1.scanco.com"
  • For User, enter the RDP user you have set up for the company
  • For Password, enter the Global RDP password you have set up for the company.
  • For Domain, enter "cloud"
  • Click on "More Settings" in the bottom of the screen, and set to "16-bit color", and checkmark both "Fit to Screen" and "Run Full Screen".
  • Save, and exit.
  • Re-enter the "Remote Desktop" and test the connection with the scanner connected to test.


Setting up the Device Name (optional)

  • Press the "Start" menu icon in the bottom left.
  • Select the "System" menu icon.
  • Scroll to "About" (scanner icon) and click it.
  • On the top right  click "Device Name"
  • Change device name here. Typically we use "RF_" with "_" being the number scanner set up.