Contents

First thing = install on the device.

First thing after installing on the device.

Server Prompt.

Port Prompt.

Setting the update message.

Device licensing required.

The device is ‘Connected’

 

First thing = install on the device

If you have an Apple device = go to App store and download and install and see next page.

If you have an Android device, go to App store OR open web browser and enter address = sales.scanco.com

On the web page presented, scroll down to this barcode.

  

Touch the barcode and the device will start downloading the application.

To see the download process, swipe down from the top of your screen.

After the download is finished, touch the application

 

First thing after installing on the device

When you launch Scanco Warehouse 100 for the first time the device will go into ‘Settings”.

 Server Prompt

 When using Warehouse 100 inside of your network you will enter the internal IP address of the Sage server \ IP address for the server that is running Scanco ConnectIt service.

Examples: 192.168.1.2 or 10.0.0.1

 

 When you are outside of your network you will enter the External IP address for the location where the Sage server \ IP address for the server that is running Scanco ConnectIt service. Example: 102.54.68.122 To finish your entry press “Return” on the on-screen keyboard.

 

Apple Screen                                              

Android Screen                                     

Cloud Screen       

 

Port Prompt

You will enter the same port number whether you are using Warehouse 100 inside of your network or outside of your network.

 The port number was set up by your IT person.

 To obtain your port number you can request the information from Scanco support or ask your IT person.

To finish your entry press “Done” on the on-screen keyboard.

 

Apple Screen                                              

Android Screen                                  

 Cloud Screen          

 

 

 

 

Setting update message

 

If this message is displayed after moving forward from the port prompt, press “Ok” on the message displayed.

Apple Screen                                                

Android Screen                                        

Cloud Screen     

 

 

Device licensing 

After settings are entered correctly the device will connect to your server and display “Connected” in green or have a green checkmark in the upper right corner.

The device is ‘Connected’

Now you are ready to log in by touching the ‘thumbprint’ icon.

Apple Screen                                               

Android Screen                                         

Cloud Screen       

 If your device shows “Unauthorized” as shown then you have to log into customers.scanco.com and adjust the number of active devices on the devices tab. The "Date Last CheckIn" column will be empty for your new devices and you can deactivate any devices that have not logged in recently and then enable your new devices. 

 

Apple Screen                                               

Android Screen                                        

Cloud Screen