Contents
Sales.Scanco.com Portal Settings.
Scanco Support Email - support@scanco.com
Scanco Support Phone number - 330-645-9959 Opt. 3
Sales.Scanco.com Portal Settings
The Bill of Materials tab options:
Allow Bill of Materials Activities: Must be enabled.
Question: what is the scanner doing when I make entries in this program.
Answer: Allowing you to collect a Bill listed in Sage ‘Bill of Materials Maintenance’ and back-flash Components when possible and collect Components when required. End results in Sage is a Production Entry will exist in …. Sage ‘Production Entry’ shown below.
Press ‘Advanced’ icon at the main applications screen to move to the Inventory applications screen.
|
Buttons Exit: to exit Scanco Warehouse. Send: to send all data collected in all applications. Setting: to adjust settings. Logout: to change users or companies. |
 |
Press ‘BOM Assembly’ icon in the Advanced applications screen to begin the program.
Batch Prompt
Scan or Key in any valid Batch or use the ‘Next’ button to start a new batch.
Buttons
Back: to move back to Main Applications screen.
Keys: for on-screen keyboard.
Next: create next batch number automatically.
Lookup: for seeing available Batches.
Enter: press after keying in data at Batch# prompt.
Production Warehouse Prompt
Scan or Key in any Warehouse, or use lookup button to select one from a list.
Buttons
Back: to move back to Main Applications screen.
Keys: for on-screen keyboard.
Lookup: for seeing all available Warehouse.
Enter: press after keying in data at Production Warehouse prompt.
Bill Prompt
Scan or Key in any Warehouse, or use lookup button to select one from a list.
Buttons
Back: to move back to Main Applications screen.
Keys: for on-screen keyboard.
Send: to send all data collected.
Lookup: for seeing all available Bills.
| Revision Prompt
Scan, key in or lookup Revisions. Buttons Back: to move back to Main Applications screen. Keys: for on-screen keyboard. Lookup: for seeing all available Revisions. Enter: press after keying in data at Revision prompt. |
 |
Bin Prompt
If your company has Multi-bin, then the bin collection prompt is required.
For Standard Sage non-multi-bin companies, this field will be a display only field.
Buttons
Back: to move back to Main Applications screen.
Keys: for on-screen keyboard.
Lookup: for seeing all available Bin.
Enter: press after keying in data at Bin prompt.
Bin Lookup
If your company has Multi-bin, then the bin lookup is available.
For Standard Sage non-multi-bin companies, the bin field will be a display only field. No lookup included.
Quantity Prompt
Scan or key in positive numeric quantity are accepted at the quantity prompt.
Buttons
Back: to move back to Main Applications screen.
Keys: for on-screen keyboard.
Enter: press after keying in data at Quantity prompt.
Components Prompt
Scan, key in or lookup Components when required.
Buttons
Back: to move back to Main Applications screen.
Keys: for on-screen keyboard.
Send: to send all data collected.
Lookup: for seeing all Component for your Bill.
Enter: press after keying in data at Component prompt.
Bin Prompt
If your company has Multi-bin, then the bin collection prompt is required.
For Standard Sage non-multi-bin companies, this field will be a display only field.
Buttons
Back: to move back to Main Applications screen.
Skip: displays the screen on the right, allows user to skip to next item.
Keys: for on-screen keyboard.
Enter: press after keying in data at Bin prompt.
Quantity Prompt
Scan or key in positive numeric quantity are accepted at the quantity prompt.
Buttons
Back: to move back to Main Applications screen.
Keys: for on-screen keyboard.
Enter: press after keying in data at Quantity prompt.
Send data collected
The ‘Send’ button at the item prompt should be pressed when all items have been collected.
Buttons
Yes: will remove the data display.
No: to move to data collection mode.
Press ‘Ok’ on this confirmation message to continue.
Comments
0 comments
Please sign in to leave a comment.